How to Unlock the iPhone 4, 3GS, 3G Using UltraSn0w![Updated to 06.15.00 BB]


These are instructions on how to unlock the iPhone 4, iPhone 3GS, and iPhone 3G for use with any GSM cellphone carrier using UltraSn0w. This will work with the iOS 4.0 firmware.

Before you can follow these instructions you must have a jailbroken iPhone and you must be on the 04.26.08, 05.11.07, 05.12.01, 05.13.04, or 01.59 baseband(modem firmware).

Step One
Press to launch Cydia Installer from your SpringBoard.



Step Two
Press to select the Manage tab at the bottom of the screen.



Step Three
Press to select the large Sources button



Step Four
If the ultrasn0w repo is not present press the Edit button at the top right of the screen. Otherwise, skip to Step Nine.



Step Six
Enter http://repo666.ultrasn0w.com/ as the source url and press the Add Source button.



Step Seven
Once the source has been added press the large Return to Cydia button.



Step Eight
Press the Done button at the top right of the screen.



Step Nine
Press to select repo666.ultrasn0w.com from the list of user entered sources.



Step Ten
Press to select ultrasn0w from the list of packages



Step Eleven
Press the Install button at the top right of the screen.



Step Twelve
Press the Confirm button at the top right of the screen.



Step Thirteen
After installation completes successfully press the large Return to Cydia button.



Step Fourteen
Now press the Home button then power off and power on the iPhone. You do this by holding down the power button for 3 seconds then moving the power slider that appears to the right. Press the power button again to turn on the phone.



Step Fifteen
You should now be able to insert the SIM of your choice!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SnowBreezeV2.9.1 Custom Firmware for iOS5.0.1 (A5 Not Included)







CREDITS

This thread was made possible with the Help of Sir Marvin378 and Sir sundae_ganda


Reminders:

1. This Tutorial will show you how to use Snowbreeze to Create Custom Firmware for iOS5.0.1, and it is not including A5 Devices.

2. Restoring a Custom Firmware made by Snowbreeze it means that it is already jailbroken.

3. Custom Firmware is used to Bypass Baseband Requirements, for iPad Baseband or you just want to personalize your iPSW like your own boot logo, set your root partition size, and even Hactivate your iPhone (for those who don't have any official sim to activate their iPhones)

4. This tutorial is Tried and Tested on my iPhone4, hindi ako yung tipong magcocopy paste lang sa ibang site or blog na hindi naman tried and tested by the Thread Starter.

REQUIREMENTS:

1. Download your iOS 5.0.1 Firmwares

2. Download sn0wbreeze v2.9.1 (For iOS 3.1.3, 3.2.x, 4.0.x, 4.1, 4.2.1 to 4.2.8, 4.3 to 4.3.3, 5.0.1)

PROCEDURES:

1. Proof that my iPhone was on iOS4.3.3



2. Backup my iPhone 4

This image has been resized. Click this bar to view the full image. The original image is sized 1024x568.



3. Run Snowbreeze

This image has been resized. Click this bar to view the full image. The original image is sized 796x570.



4. Browse your iPSW5.0.1

This image has been resized. Click this bar to view the full image. The original image is sized 796x565.

This image has been resized. Click this bar to view the full image. The original image is sized 797x572.



5. Wait to be Recognized.

This image has been resized. Click this bar to view the full image. The original image is sized 791x570.



6. Choose Expert Mode.

This image has been resized. Click this bar to view the full image. The original image is sized 799x570.



7. Choose General

This image has been resized. Click this bar to view the full image. The original image is sized 796x570.



8. From this Point, you can customize your iPSW, Hactivate your iPhone, install SSH, and set your root partition size.

By default;

iPhone 4 = 1GB = 1024MB
iPhone 3GS = 800MB

It is adviceable to use just the default Root Partition Size.

Then click on the NExt Arrow

This image has been resized. Click this bar to view the full image. The original image is sized 797x572.



9. You can add your Repository Site to your iPSW, and download the packages with it. Click on Next.

This image has been resized. Click this bar to view the full image. The original image is sized 793x570.

This image has been resized. Click this bar to view the full image. The original image is sized 796x569.



10. Click on Build iPSW

This image has been resized. Click this bar to view the full image. The original image is sized 795x569.



11. Then wait until your Custom Firmware is created.

This image has been resized. Click this bar to view the full image. The original image is sized 795x570.

This image has been resized. Click this bar to view the full image. The original image is sized 795x574.




This image has been resized. Click this bar to view the full image. The original image is sized 796x570.

This image has been resized. Click this bar to view the full image. The original image is sized 796x572.




This image has been resized. Click this bar to view the full image. The original image is sized 794x569.

This image has been resized. Click this bar to view the full image. The original image is sized 794x569.




12. DONE!

This image has been resized. Click this bar to view the full image. The original image is sized 795x569.

This image has been resized. Click this bar to view the full image. The original image is sized 794x568.



13. Set your iPhone to PWNED DFU MODE. Just follow the steps on your Screen

This image has been resized. Click this bar to view the full image. The original image is sized 796x568.

This image has been resized. Click this bar to view the full image. The original image is sized 796x573.



14. Open your iTunes, and Press and Hold the Restore Button, and Choose the Snowbreeze iPSW Filename.

This image has been resized. Click this bar to view the full image. The original image is sized 1024x570.

This image has been resized. Click this bar to view the full image. The original image is sized 1024x570.





Factory Unlocked ang iPhone4 ko.

This image has been resized. Click this bar to view the full image. The original image is sized 1024x568.



15. Cydia already Installed.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SIRI on my IPOD TOUCH 4 with STEP BY STEP PROCEDURE!!!





Click image for larger version Name: siri.jpg Views: 66 Size: 12.7 KB ID: 470096


ito naman po yung video proof


http://www.youtube.com/watch?v=0XUnkgWbSBM


ito naman po yung procedure step by step



1. Go to cydia install "Spire"

2. go to Safari (From iDevice) install this certificate http://freemanrepo.com/server1.crt

3. go to Settings--->Spire---> Proxy host: "https://69.194.139.98:446"

4. Settings-->General--->Off Siri--->On Siri

5. Run Siri

6. Enjoy
Age Of Empire - iPhone iPodTouch iPad
Age Of Empire - iPhone iPodTouch iPad








The Middle Ages, this is a dark time filled with wars, desires, and rights......

In this chaotic world, all the people are waiting for a hero who can free them from the dog days. Game will bring players back to the Middle Ages that was flames of war. Player can play a role of lord and control the whole kingdom. A strong military empire will be totally created by yourself! From construction of basic facilities to production, process and trade; from alliance by using smart diplomatic strategy to unique strategy of attack......

Lead ten thousand people into battle and enjoy charm of the great military leaders! Age of Empire, and begin your own legend of empire!

Features
The most beautiful images: original detailed pictures let you feel the glamour of the Middle Age.
The most magnificent battle: ten thousand arrows shot at once; glinting and flashing; full of enery; they make you experience true and cool battle!
The most powerful empire: upgrading buildings, strengthening city defense, training soldiers and leading 1 million main force! Be a king!
The most excited PK: plundering money, lands, foods and cities. Let all enemies call you master!
The most fluent experience: easy operation and warm mission guide; let you easily and quickly get started.

Requirements: Compatible with iPhone, iPod touch, and iPad. Requires iOS 4.0 or later.

Updated: Dec 29, 2011
Version: 1.0.5
Size: 18.5 MB
Languages: English, Chinese
Seller: ELEX Technology Holdings Co., Ltd.


Download Link:
Fileserve
http://www.fileserve.com/file/yG3kX8k
Filesonic
http://www.filesonic.com/file/U82D6Ri
Free iOS Games & Apps Legally! (No need for jailbreak)
This is 100% free and legal.
This method is good for those who don't want to jailbreak or simply doesn't have the time to get them jailbroken.
Earn credits just by installing their sponsored apps, later you can use those credits to legally buy apps like Fruit Ninja, Angry Birds, Infinity Blade II
You can get extra credits when you refer the website to your friends.

What you need:
1. iOS Device (iPhone/iPad/iPod touch)
2. Internet connection
3. US iTunes Account (If you're in another country just create a new US Account)
4. Free time

Link Here: Click Here (Use this link so that you can help me earn credits )

This is how you do it:

Step 1:
First open the link above on your iDevice
Then click on "Get Apps!"


Step 2:
Click Any Apps


Step 3:
Your device will prompt you to install a profile
Click "OK"


Step 4:
It is verified by Apple so don't worry
Click "Install"


Step 5:
Install any of their sponsored apps and use it for at least 30 seconds
Again, use it for at least 30 seconds or you won't get the credits


Step 6:
You can use those credits to buy apps & games
They have tons of popular apps like Infinity Blade II, Grand Theft Auto 3, Batman, Etc.